Canon these radio commercials touting how easy it is to produce images like the pros, if you buy a Rebel XTi has been effective, face it.So you out and bought a camera SLR digital. Now read the owner's manual from front to rear. But who really wants to do that? Follow these tips if you feel overwhelmed by the thick manual. Here's what you need to know to just "make it work the camera. "I say" operate "because you're not in total control and you let the camera do its job for you.
- Set the camera on auto. If no full-auto, do it. The idea here is to take some photos to give you something to work.
- Download images to your computer. There are usually 2 options even if a 3rd Now there is quite amazing but may not be for everyone.
- Format the memory card. When the card is full, and after you've downloaded the images on your computer, this setting allows you to erase images on the card and releases it to be reused again and again.
- ISO. ISO refers to the sensitivity of the CCD or charged couple device. If you were a film shot is like having the ability to change film speed in mid-roll.You could find yourself in low light, so it is a must.
- Shutter Speed and Aperture. Select aperture priority and the opening of the target at f 5.6. As long as you do not receive some sort of protest from your camera, you should be fine. If the shutter speed drops below something you can not hold hands, some cameras will beep or kick in the flash (assuming you have one on top of the camera)
- White Balance. The value defaults to the camera white balance automatically. Who works for 95% of the time. Since you have invested money in an amateur camera, why not see what you paid? If you do not try to change the balance White manually, you never know. In general, it is daylight, cloudy, fluorescent, incandescent, auto and custom. The surest way to know is to test taking the same subject from all different lighting conditions, then open the image on your computer. The small LCD screen (LCD display liquid) monitor on the camera is not a good measure.
- Compression. This is the setting or what known as the "quality" as the camera records images. Used to be more of a problem when memory cards were expensive. These days everyone has a drawer full of these cards, because most people never download their images as in the time of the film, they never developed the roll of film until they have absolutely only difference is allegedly to.The memory cards can store your images indefinitely no degradation.Film because of its chemical nature deteriorates.
- Auto focus sensor. By default, most cameras have this "red" cursor centered. You want to be able to change this unless you want your object to be always at the center.
First option requires you to install the driver software on your computer and connect your camera via a cable (usually USB 2.0)
The 2nd option using an external card reader is the one I recommended because it does not drain the battery of your camera and your camera need not be attached to your computer.This you can continue shooting if you have another memory card. Why wait around? Life is too short and memory cards are so cheap now.
Your 3rd option, if your camera uses the "SD" or secure digital, involves purchasing a Wi-Fi memory card. This map Special SD can transfer your pictures wirelessly to your computer via your WiFi network to your computer then transfer the image of many sharing websites.
Once you've mastered Steps 1,2 & 3, you are ready to undertake dangerous and reckless abundance. Go around your owner's manual how to change these settings next
If you're shooting a moving subject, select shutter priority and see if you can take a picture at 1 / 500 seconds. There even if the light is insufficient, there is usually some indication. The focus in my camera changes color from green to yellow as indicator. Yours may have something similar.
So there you have it. Other features like auto bracketing and the rate of bursting or continuous or predictive focusing are secondary. These parameters will be useful once you have mastered Tips 1 to 8.
Peter Phun is an adjunct photography instructor at Riverside City College. He is a freelance photographer, web designer and stay at home dad. He previously worked as a staff photographer for 18 years at The Press-Enterprise, Southern California’s 4th largest daily newspaper. Peter is the webmaster for the Mac user group in the Inland Empire. For information about this Riverside based photographer, visit http://www.peterphun.com
How to remotely connect to EITU computers from a MAC terminal?
